Glass Base Rail System
Glass Base Rail System
The glass base rail system is made up of a thin piece of metal that runs along the bottom of the railing, holding up each glass panel. The top of the glass panels can act as the handrail — so there’s no need to add a metal or wood handrail.
But a slender metal railing cap can be added to the top of the panels, for a sleeker, finished look. The base rail comes in lengths of 4′, 8′, and 12′.
Product Information
The base rail is available in lengths of 4′, 8′, and 12′ which gives the latitude to work with varying size constraints. The glass base rail system is one of two glass railing configurations (the other being talon spigots) that use the patented tilt lock technology. Tilt lock is an innovative technology that greatly helps with the installation of glass panels.
Normally, in order to install a base rail like this, the installer would have to grout both sides of the glass panels in-between the outer rubber channels in order to make the glass panels sit perpendicular to the ground. They would also have to use grout to align the glass panels with one another. Tilt lock takes the human error out of this process.
Frameless Glass Base Rail System w/ Tilt Lock
$460.00 – $1,599.00
Product Information
| Weight | 35 lbs |
|---|---|
| Dimensions | 144 × 12 × 12 in |
| Overall Length | 4 feet long, 8 feet long, 12 feet long |
Description
Description
With clean, modern lines and innovative Tilt Lock technology, the Glass Base Rail System elevates your style and makes it simple to align glass during installation. This system is available in 4′, 8′ and 12′ lengths, and works well with both ½” and 9/16” thick glass (sold separately). For a chic, fresh vision—choose the Glass Base Rail System.
Key Features
• Made from Anodized Aluminum
• Tilt-Lock Technology enables simple installation
• Compatible with ½” tempered and 9/16” laminated glass
• Comes in 4′, 8′ and 12′ lengths
Tilt Lock Technology
Perfecting the alignment of your glass panels can be a big headache. Even after installation, high winds can ruin the positioning – or worse, shatter the panels.
The Tilt Lock Technology found in the Side Mount Clips gently grips the glass during installation. Adjust the panels until they are precisely positioned, then lock down the clips, securing the glass in place.
This revolutionary technology also helps relieve the trouble caused by high winds. Tilt Lock Technology allows the glass panels to flex ever so slightly, maintaining panel alignment and reducing the risk of shattered glass. Even if weather causes the system to shift around, re-aligning the disrupted glass panels is a breeze.
Installing glass can be tricky. Keep the process simple with Tilt Lock Technology.
Includes:
BR69 for 1/2″ glass panels Includes:
1 Channel in Relevant Lengths
2 Full covers with rubber
2 Base Rail End Caps
3 Base Rail Glass Grips
2 Base Rail Gap Fillers
4 Stabilizing Base Rail Washers
*Included products based off of a BR69 12′ Section*
Product Information
| Weight | 35 lbs |
|---|---|
| Dimensions | 144 × 12 × 12 in |
| Overall Length | 4 feet long, 8 feet long, 12 feet long |
Additional information
| Weight | 18 kg |
|---|---|
| Dimensions | 120 × 60 × 25 cm |
| Rail Width | 4' feet long, 8' feet long, 12' feet long |
Reviews
There are no reviews yet.